Flame detection equipmenttraining manual template word 2016

A fire detection and alarm system provides audible and visual signals as a result of the operation of manual or automatic fire alarm initiating devices such as a Manual Fire Alarm station, smoke detector or heat detector of from other protective equipment such as a fire sprinkler system. A flame detector is a sensor designed for the purpose of responding to any flame that is present in the area by turning off a fuel line or turning on a fire suppression system. Upon detection of a flame, the flame detector also turns on an alarm that will alert people to the danger that is nearby. Regular visual inspection of manual call points and fire detectors is required to ensure that: Manual call points are unobstructed and conspicuous. A clear space of 500mm is maintained below each automatic fire detector and is not impeded by any other means i.e. accumulation of dust in detector head or layers of paint. 1.1 Scope. 1.1.1 NFPA 72 covers the application, installation, location, performance, inspection, testing, and maintenance of fire alarm systems, supervising station alarm systems, public emergency alarm reporting systems, fire warning equipment and emergency communications systems (ECS), and their components. 1.1.2 The provisions of this chapter apply throughout the Code unless otherwise Fireye is a leading manufacturer of flame safeguard controls and burner management systems in multiple applications. ignition and continuous flame monitoring for commercial heating & process equipment. View. Product Manuals. Search through our library of product manuals to find information Training Manual Template Training manual templates are holding significant importance, not only in the eyes of organization but also for customers. Whenever some sort of expensive product or set of products are purchased, training manuals put to use for compliance. (a) Operate trigger device (manual call point or detector) or end of line switch on a zone circuit. Zones should be tested